Names Of Each Part - Mitsubishi Electric MELSEC-L LD75P User Manual

4.1.2

Names of each part

(1) Names of each part
The part names of the LD75 are shown below:
No.
1) RUN indicator LED, ERR. indicator LED
2) Axis display LED (AX1 to AX4)
3) External device connector
Differential driver common terminal
4)
(Differential driver output system (the LD75D) only)
5) Serial number plate
80
1)
2)
3)
5)
LD75P4
Name
LD75D4
Refer to  Page 81, Section 4.1.2 (2).
Connector for connection with the drive unit, mechanical system input or manual
pulse generator. (40-pin connector)
AX1: Axis 1, AX2: Axis 2, AX3: Axis 3, AX4: Axis 4
For details, refer to  Page 73, Section 3.4.2.
Terminal connected to the differential receiver common of the drive unit. For details,
refer to  Page 89, Section 4.3.2.
Indicates the serial number of the LD75.
1)
2)
3)
4)
5)
Description