Table of Contents
Advertisement
7. E-mail setting
When the communication with the projector monitored by the theft detector is disrupted, a warning E-mail can be
sent to the designated address, enabling to serve for early detection of the projector theft.
The E-mail setting can not be set at every projector and every group. The same setting should be set for all
projectors.
7.1. Connection with E-mail server
Connect the E-mail server to the network to which the controller PC and the projector are connected that
"ProjectorView Global+" is operating.
7.2. E-mail setting
Designate the address of the E-mail server and the address of the destination to be sent.
<Note>
• As for the network environment, confirm to the network administrator.
(1) Select "Edit E-mail Setting" from "Configuration" of the menu bar on the main screen.
• "Edit E-mail Setting" window is displayed.
(2) Input the setting item for the network environment, and click [Save].
Item
E-mail Server (SMTP)
Destination E-mail Address
7.3. Sending test E-mail
After completing the setting of the each item on the E-mail Setting window, a test E-mail can be sent to confirm
whether the E-mail is correctly delivered to the destination. When clicking [Test E-mail] at the upper right on
the Email Setting window, the test E-mail is issued. Confirm whether the E-mail is correctly delivered to the
destination address.
<Note>
• The E-mail function will be executed while "ProjectorView Global+" is in operation.
• If the test E-mail is not correctly received, confirm the address of the E-mail server and the destination, and
the connection status of the network. For details, make an inquiry to the network administrator.
• The E-mail may possibly not be delivered depending on the certification function of the E-mail server. For
details, make an inquiry to the network administrator.
• When the communication with the projector monitored by the theft detector is disrupted, a theft check error
dialog is displayed.
However, the projector list isn't updated at the same time because it takes some time to update the list.
Description
E nter the IP address of the E-mail server (Example: 192.168.7.230), or
input the server name (Example: mail.example.com).
Enter the destination E-mail address using up to 64 single-byte
characters. (Up to 3 places can be designated at the maximum.)
EN-19
Advertisement
Table of Contents
