Mitsubishi Electric MELSEC-L LD75P User Manual page 38

No.
Understand the product functions and usage methods, the configuration devices and
1)
specifications required for positioning control, and design the system.
Connect the LD75 to the CPU module, wire the LD75 and external connection devices (drive
2)
unit, etc.), connect the CPU module and GX Works2.
Using GX Works2, set the parameters, positioning data, block start data and condition data
3)
required for the positioning control to be executed.
Using GX Works2, create the program required for positioning operation. (When not setting
4)
using GX Works2, also create the program for setting data.)
5) Write the parameters and positioning data, etc., created with GX Works2 into the LD75.
Using GX Works2, write the created program into the CPU module. (When not setting using
6)
GX Works2, also write in the program for setting data.)
Carry out test operation and adjustments in the test function to check the connection with the
7) LD75 and external connection device, and to confirm that the designated positioning
operation is executed correctly. (Debug the set "parameters" and "positioning data", etc.)
Carry out test operation and adjustment to confirm that the designated positioning operation
8) is executed correctly. (Debug the created program. When not setting using GX Works2, also
debug the set data.)
Actually operate the positioning operation. At this time, monitor the operation state as
9)
required. If an error or warning occurs, remedy.
10) Service the LD75 as required.
11) Dispose of the LD75.
36
Details Reference
• Page 22, CHAPTER 1
• Page 44, CHAPTER 2
• Page 49, CHAPTER 3
• Page 316, CHAPTER 8 to Page 609, CHAPTER 13
• Page 79, CHAPTER 4
• Page 93, CHAPTER 5
• Page 316, CHAPTER 8 to Page 609, CHAPTER 13
• Page 737, Appendix 6
•  GX Works2 Version 1 Operating Manual
(Intelligent Function Module)
• Page 235, CHAPTER 6
•  GX Works2 Version 1 Operating Manual
(Common)
• Page 305, CHAPTER 7
•  GX Works2 Version 1 Operating Manual
(Common)
• Page 305, CHAPTER 7
•  GX Works2 Version 1 Operating Manual
(Common)
• Page 737, Appendix 6
•  GX Works2 Version 1 Operating Manual
(Intelligent Function Module)
• Page 609, CHAPTER 13
• Page 737, Appendix 6
•  GX Works2 Version 1 Operating Manual
(Intelligent Function Module)
• Page 93, CHAPTER 5
• Page 640, CHAPTER 15
•  GX Works2 Version 1 Operating Manual
(Intelligent Function Module)
• Page 79, CHAPTER 4
• Page 79, CHAPTER 4