Mitsubishi Electric MELSEC-L LD75P User Manual page 554

(b) The following shows a time chart for changing the speed using the override
function.
Positioning start signal [Y10]
PLC READY signal [Y0]
LD75 READY signal [X0]
Start complete signal [X10]
BUSY signal [XC]
Positioning complete [X14]
signal
Error detection signal [X8]
(c) Add the following program to the control program, and write it to the CPU module.
Example
No.15 Override program
552
V
Cd.13 Positioning operation
speed override
Dwell time
200
<Pulsate override command>
<Set override value (200%)>
<Write override value>
t