Appendix 6.1 Adding A Module - Mitsubishi Electric MELSEC-L LD75P User Manual

Appendix 6.1
Add the model name of the positioning module to be used in the project.
(1) Operating procedure
1.
Open the "New Module..." dialog box.
Project window  [Intelligent Function Module]  Right-click  "New Module..."
2.
Configure settings.
Set the following items.
Module Selection
Mount Position
Title Setting
738
Adding a module
Item
Module Type
Module Name
Mounted Slot No.
Specify start X/Y address
Title
Select "LD75 Type Positioning Module".
Select the model name of the module to be connected.
Select the number of the slot where the module is mounted.
The start I/O number (hexadecimal) of the module to be mounted on the slot set in
"Mounted Slot No." is displayed. The value can be changed.
Enter a title.
Description