(1) OPR sub functions
Refer to Page 59, Section 3.2.5 for details on "sub functions" that can be combined with OPR control. Also
refer to Page 507, CHAPTER 12 for details on each sub function.
[Reference]
The following two sub functions are only related to machine OPR.
: Combination possible, : Restricted, : Combination not possible
Sub function name
OPR retry function
OP shift function
(2) When an OPR is not required
Control can be carried out ignoring the "OPR request flag" ([Md.31] Status: b3) in systems that do not require an
OPR.
In this case, the "OPR parameters ([Pr.43] to [Pr.57])" must all be set to their initial values or a value at which an
error does not occur.
(3) OPR from GX Works2
"Machine OPR" and "fast OPR" can be executed by the test function of GX Works2.
Refer to Page 756, Appendix 6.5 for details on OPR by GX Works2.
Machine OPR
CHAPTER 8 OPR CONTROL
Fast OPR
Page 510, Section 12.2.1
Page 515, Section 12.2.2
Reference
8
317