3.
Select the function.
Select "New Speed" from the pull-down menu of "Select Function ".
4.
Execute the speed change test.
Execute the speed change function.
New Speed:
Enter the new speed value during the startup of positioning start test or OPR test, and click the
[New Speed] button.
Override:
Enter the speed override value and click the [Speed Override Change] button.
Acceleration/Deceleration Time Change:
Check the "Acceleration/deceleration time change enable" checkbox, set the acceleration time and
deceleration time values, and click the [New Speed] button.
APPENDICES
A
761