(4) Current value change test
The current feed value of the LD75 can be changed to the specified address.
(a) Operating procedure
1.
Open the "Positioning Test" dialog box.
Display the "Positioning Test" window.
[Tool] [Intelligent Function Module Tool] [QD75/LD75 Positioning Module] [Positioning/Test]
Monitor current values such
as the current feed value and
feedrate.
Test each function while
checking current values with
the monitor.
2.
Select the test target axis.
Select the test target axis from the pull-down menu of "Target Axis".
3.
Select the function.
Select "Current Value Changing" from the pull-down menu of "Select Function".
• Enter the new current value and click the [Current Value Changing] button.
762