Mitsubishi Electric MELSEC-L LD75P User Manual page 217

(5) [Cd.7] M code OFF request
Item
Setting details The M code ON signal turns OFF.
■Set with a decimal.
Setting
value
Setting value
Default value 0
Axis 1: 1504
Storage buffer memory Axis 2: 1604
address Axis 3: 1704
Axis 4: 1804
(6) [Cd.8] External command valid
Item
Setting details Validates or in validates external command signals.
■Set with a decimal.
Setting value
Setting value
Default value 0
Axis 1: 1505
Storage buffer memory Axis 2: 1605
address Axis 3: 1705
Axis 4: 1805
K 1
M code OFF request
1: M code ON signal turns OFF
After the M code ON signal turns OFF, "0" is stored by the LD75 automatically.
(Indicates that the OFF request is completed.)
K
External command valid
0: Invalidates an external command.
1: Validates an external command.
CHAPTER 5 DATA USED FOR POSITIONING CONTROL
Description
Description
5
215