Configuration List - Mitsubishi Electric MELSEC-L LD75P User Manual

2.2

Configuration List

The positioning system using the LD75 is configured of the following devices.
No. Product name
1 Positioning module
2 GX Works2
3 Personal computer
4 USB cable
5 Ethernet cable
6 Drive unit
7 Manual pulse generator
(1) Specifications of recommended manual pulse generator
Model name
Pulse resolution
Output method
Power supply voltage
Current consumption
Output level
Life time
Permitted axial loads
Operation temperature
Weight
Number of max. revolution
Pulse signal status
Start friction torque
*1 Use the stabilized power supply of 4.5 to 6.1VDC for the power supply of the manual pulse generator.
Model name
LD75P1
LD75
LD75P2
LD75P4
LD75D1
LD75D2
LD75D4
 For details, refer to  GX Works2 Version 1 Operating Manual (Common).
Personal computer which
(Prepared by user)

For details, refer to  GX Works2 Version 1 Operating Manual (Common).
supports Windows
(Prepared by user)

A USB cable is needed for connecting the CPU module with a personal computer.
For details, refer to  GX Works2 Version 1 Operating Manual (Common).
(Prepared by user)

An Ethernet cable is needed for connecting the CPU module with a personal computer.

(Prepared by user)
(Prepared by user)

Recommended: MR-HDP01 (Mitsubishi Electric)
Item
Voltage-output (power supply voltage -1V or more), Output current = Max. 20mA
CHAPTER 2 SYSTEM CONFIGURATION
Remarks
No. of control axes
P Open collector output system
D Differential driver output system
Specifications
MR-HDP01
25pulse/rev (100 pulse/rev after magnification by 4)
*1
4.5 to 13.2VDC
60mA
*1
"H" level: power supply voltage -1V or more (in no-load)
"L" level: 0.5V or less (with maximum leading-in)
100 revolutions (at 200r/min)
Radial load: Max. 19.6N
Thrust load: Max. 9.8N
-10 to 60
0.4kg
Instantaneous Max. 600r/min. normal 200r/min
2 signals: A phase, B phase, 90 phase difference
0.06Nm (at 20 (68))
2
47