Table of Contents
Advertisement
4
SYSTEM CONFIGURATION
This chapter describes system configuration using an IO-Link module.
For CC-Link IE Field Network configuration, refer to the following.
User's manual for the master/local module used
4.1
Applicable Systems
M_CommDTM-IOLink
(1) Personal computer (engineering tool/FDC)
Applicable master station
When using an IO-Link module, use the following products as a master station.
*1
Model
RJ71GF11-T2
RJ71EN71
R04ENCPU, R08ENCPU, R16ENCPU, R32ENCPU, R120ENCPU
QJ71GF11-T2
LJ71GF11-T2
*1 Simple motion modules and interface boards compatible with the CC-Link IE Field Network cannot be used.
Information on "Applicable master station" described above is the ones at the point when this manual was issued.
For latest information, please visit the website of CC-Link Partner Association.
www.cc-link.org
Ethernet cable
Use a general-purpose Ethernet cable compliant with 1000BASE-T.
Consider the operating environment when selecting available cables that satisfy the product specifications.
(1)
IODD DTM Configurator
NZ2GF12A-60IOLH8
First five digits of serial number
No restriction
DeviceDTM
4 SYSTEM CONFIGURATION
4.1 Applicable Systems
4
IODD
29
Advertisement
Table of Contents
Troubleshooting
