Error code list
When faulty, the error code is stored in SD2.
For details of error code stored in SD2, the error contents, cause and measures, refer to the following:
62.3.5 Details and actions for errors (error codes) stored into SD2
When an error other than those to be stored in SD2 occurs, at faulty, only the NAK response is executed.
Precautions
(1) Batch reading/writing crossing over different devices
When using the batch read (0, A) or batch write (1, B) command, do not batch read/write crossing over different
devices.
This will cause an error response.
62. MICROCOMPUTER CONNECTION (ETHERNET)
62.4 Message Formats
56
57
58
59
60
61
62
63
62 - 41