WAGO I/O System 750
750-1505 16DO 24VDC 0.5 A, low-side switching
5.2
Inserting and Removing Devices
Pos : 69.11 /Serie 750 ( WAGO I/O SYST EM)/Monti eren/D emonti eren/I/O-M odul einfügen ( neutr ales 3D) @ 35\mod_1561382037253_21.doc x @ 548869 @ 3 @ 1
5.2.1
Inserting the I/O Module
1.
Position the I/O module in such a way that the groove and spring are
connected to the preceding and following components.
Figure 7: Inserting I/O Module (Example)
2.
Press the I/O module into the assembly until the I/O module snaps into the
carrier rail.
Figure 8: Snap the I/O Module into Place (Example)
3.
Check that the I/O module is seated securely on the carrier rail and in the
assembly. The I/O module must not be inserted crooked or askew.
Public
Mounting
31
Manual
Version 1.1.0