Lon ® Ftt Module; Enocean Radio Receiver; Mp Bus Master Module; Table 285: Enocean Radio Receiver 750-642 - WAGO 750-8207 Manual

368 Appendix
11
DA = DALI address
GA = Group address
®
15.1.5.13 LON FTT Module
753-648
The process image of the LON
23 bytes of bidirectional communication data that is processed by the WAGO-I/O-
PRO function block "LON_01.lib". This function block is essential for the function
of the LON

15.1.5.14 EnOcean Radio Receiver

750-642
The EnOcean radio receiver has a total of 4 bytes of user data in both the Input
and Output Process Image (3 bytes of module data and 1 byte of control/status).
The following tables illustrate the Input and Output Process Image, which have 2
words mapped into each image. Word alignment is applied.

Table 285: EnOcean Radio Receiver 750-642

Input Process Image
Offset
0
1
Output Process Image
Offset
0
1

15.1.5.15 MP Bus Master Module

750-643
The MP Bus Master Module has a total of 8 bytes of user data in both the Input
and Output Process Image (6 bytes of module data and 2 bytes of control/status).
The following table illustrates the Input and Output Process Image, which have 4
words mapped into each image. Word alignment is applied.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Bit 8...15
®
®
FTT module and provides a user interface on the control side.
Byte Destination
High Byte
D0
D2
Byte Destination
High Byte
-
-
750-8207 PFC200 CS 2ETH RS 3G
Bit pairs GA1 ... GA15 similar to
GA0.
Bit 0...7 Switch scene 0...15
FTT module consists of a control/status byte and
Low Byte
S
D1
Low Byte
C
-
WAGO-I/O-SYSTEM 750
long: dimming, darker
Description
Data byte Status byte
Data bytes
Description
not used Control byte
not used