Fusing Via Power Supply Module; Figure 9: Supply Module With Fuse Carrier (Example 750-610/040-000); Table 7: Power Supply Modules - WAGO -I/O-SYSTEM 750 XTR Manual

32 System Description
3.6.4.2

Fusing via Power Supply Module

Internal fusing of the field supply is possible for various field voltages via an
appropriate power supply module.

Table 7: Power Supply Modules

Order No.
750-601/040-000 Power Supply 24 VDC Fuse XTR
750-610/040-000 Power Supply 24 VDC Fuse Diagn XTR
750-606/040-000 Power Supply 24 VDC Diagn for Ex i XTR Modules

Figure 9: Supply Module with Fuse Carrier (Example 750-610/040-000)

Observe the maximum power dissipation and, if required, UL requirements!
In the case of power supply modules with fuse holders, you must only use fuses
with a maximum dissipation of 1.6 W (IEC 127).
For UL approved systems only use UL approved fuses.
Manual
Version 1.3.0
750-352/040-000 FC ETHERNET G3 XTR
Field Voltage
WAGO-I/O-SYSTEM 750 XTR