Table 268: Counter Modules 750-404/000-005; Table 269: Counter Modules 750-638, 753-638 - WAGO 750-8207 Manual

358 Appendix
750-404/000-005
The above Counter Modules have a total of 5 bytes of user data in both the Input
and Output Process Image (4 bytes of counter data and 1 byte of control/ status).
The two counter values are supplied as 16 bits. The following tables illustrate the
Input and Output Process Image, which has a total of 3 words mapped into each
image. Word alignment is applied.

Table 268: Counter Modules 750-404/000-005

Input Process Image
Offset
0
1
2
Output Process Image
Offset
0
1
2
750-638,
753-638
The above Counter Modules have a total of 6 bytes of user data in both the Input
and Output Process Image (4 bytes of counter data and 2 bytes of
control/status). The two counter values are supplied as 16 bits. The following
tables illustrate the Input and Output Process Image, which has a total of 4 words
mapped into each image. Word alignment is applied.

Table 269: Counter Modules 750-638, 753-638

Input Process Image
Offset
0
1
2
3
Output Process Image
Offset
0
1
2
3
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Byte Destination
High Byte
-
D1
D3
Byte Destination
High Byte
-
D1
D3
Byte Destination
High Byte
-
D1
-
D3
Byte Destination
High Byte
-
D1
-
D3
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
Low Byte
S
D0 Counter Value of Counter 1
D2 Counter Value of Counter 2
Low Byte
C
D0 Counter Setting Value of Counter 1
D2 Counter Setting Value of Counter 2
Low Byte
S0 Status byte von Counter 1
D0 Counter Value von Counter 1
S1 Status byte von Counter 2
D2 Counter Value von Counter 2
Low Byte
C0 Control byte von Counter 1
D0 Counter Setting Value von Counter 1
C1 Control byte von Counter 2
D2 Counter Setting Value von Counter 2
Description
Status byte
Description
Control byte
Description
Description