Package Server" Page; Table 37: Description Of The Parameters Of The "Package Server" Page - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Pos: 44.6 /Serie 758 (Funk, IPC und PFC)/Konfigurieren/Konfigurieren 785-87x - allgemein 5 @ 12\mod_1331131418014_21.doc @ 90415 @ 3333333322 @ 1
9.1.11

"Package Server" Page

From the "Package Server" page, copy the firmware as a "backup package" from
the current partition of the I/O-IPC to devices attached to the I/O-IPC. An "Update
Package" may contain all or the following individual components: the CoDeSys
project, I/O-IPC settings, and the file system.

Table 37: Description of the Parameters of the "Package Server" Page

Backup
You can initiate backups from the active partition of your IPC to a selected destination. In the
table, an arrow illustrates the direction of the backup – the packages are saved from the active
partition to the selected destination.
Creating the backup files takes some time on the IPC. A progress bar appears after clicking the
button [SUBMIT].
Active Partition
Packages
Destination
Manual
Version 1.0.0
The partition of your IPC currently active appears. The backups can only be
performed from this partition.
Select the checkbox of the package for which you want to create a backup:
All:
CoDeSys Project:
Settings:
System:
You can select the destination to which your backup should be saved. All
media currently attached appear such as the CF card, internal flash memory and
various USB storage. The media currently active (from which the backup is
created) does not appear in the list.
The list also contains the "Network" item. If you select this item, the backup
files are downloaded to your computer via the network; only one package can
be transferred per operation. If you select the "Network" menu item, you
cannot select multiple packages nor select the "All" checkbox. After clicking
the [SUBMIT] button and creating the backup file, your browser displays the
typical download window to save the file to the file system of your computer.
When saving the file, do not remove any text from the suggested file name and
add something to the end of it (numbers, etc.). The packages can be assigned in
the first step (only) by the file names.
The backup of the "CoDeSys" and "System" packages creates compressed
memory dump of complete partitions. However, the Settings backup is created
using the config tools and saved in a text file. The text files can be viewed in
any normal text editor and manually edited, as required. However, you must
know exactly in what format the individual config tools save or need the
parameter values.
Selection of all "backup packages"
CoDeSys project
All settings that can be made e.g. via the WVM such
as IP addresses, ETHERNET settings,
HMI configuration, etc.
The complete system partition
Configuration 83