Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
7.8.4.8
"Package Server" Menu
This menu contains other submenus with functions for firmware backup and
restore, as well as information and setting options for the current system partition.
Table 156: "Package Server" Menu
Menu Item
0. Back to ...
1. Firmware Backup
2. Firmware Restore
3. System Partition
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.4.8.1 "Package Server" > "Firmware Backup" Submenu
This submenu contains a selection option for the data to be saved.
The submenu only appears if a memory card is inserted that does not contain a
bootable system. Otherwise, a message is displayed.
Table 157: "Package Server" > "Firmware Backup" Menu
Menu Item
0. Back to ...
1. All
2. PLC Runtime project
3. Settings
4. System
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
You are taken to the following submenu after making the selection.
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Explanation
Back to the higher-level menu
Opens a submenu with functions for the firmware
backup
Opens a submenu with functions for the firmware
restore
Opens a submenu with information and setting
options for the current system partition
Explanation
Back to the higher-level menu
All data is saved.
The PLC runtime project is saved.
The controller settings are saved.
The controller operating system is saved.
Commissioning 193
Manual
Advertisement
Chapters
Table of Contents
Troubleshooting
