Grouping; A Group: Moving Motors 1 To 4 Simultaneously; Simultaneously; Moves Individually - WAGO WINSTA 770 Manual

WAGO WINSTA® 770
770-629/130-000 WINSTA® Sunblind Box 4 Channel
7.4.3

Grouping

Set the grouping with the switches 1, 2, and 3 of the DIP module 2.
The drives are thus assigned via the plug connectors to the selected groups and
local push buttons.
7.4.3.1

A Group: Moving Motors 1 to 4 Simultaneously

In order to form just one group in which all connected motors move at the same
time, make the following settings:

Table 17: One group, motors 1 to 4 move simultaneously

Figure 20: One group, motors 1
to 4 move simultaneously
7.4.3.2 Two Groups: Moving Motors 1 and 2 and Motors 3 and 4

Simultaneously

To form two groups, Group A in which motors 1 and 2 and Group B in which
motors 3 and 4 move together, make the following settings:
Table 18: Two groups: motors 1 and 2 and motors 3 and 4 move simultaneously
Figure 21: Two groups: motors 1
and 2 and motors 3 and 4 move
simultaneously
7.4.3.3 Two Groups: Moving Motors 1, 2, and 3 Simultaneously, Motor 4

Moves Individually

In order to combine the motors 1, 2, and 3 into group A while motor 4 moves
individually, make the following settings:
Table 19: Two groups: motors 1, 2, and 3 move simultaneously, motor 4 moves individually
Figure 22: Two groups: motors 1,
2, and 3 move simultaneously,
motor 4 moves individually
Manual
Version 1.2.0, valid from HW/FW version XXXX0201XX
Assignment of motors - local push buttons
Motor 1
Push
S1
button
Assignment of motors - local push buttons
Motor 1
Push
S1
button
Assignment of motors - local push buttons
Motor 1
Push
S1
button
Commissioning
2 3
S1 S1
2 3
S1 S3
2 3
S1 S1
37
4
S1
4
S3
4
S4