Interface Ethernet - Cisco Nexus 7000 Series Command Reference Manual

interface ethernet

interface ethernet
To configure an Ethernet interface on which you are enabling the Multiprotocol Label Switching
(MPLS) Label Distribution Protocol (LDP), use the interface ethernet command. To return to the
default setting, use the no form of this command.
Syntax Description
slot/chassis number
Defaults
None
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines When you disable the Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP) on the
device, no LDP commands are available.
This command requires the MPLS Services license.
Examples This example shows how to configure the Ethernet interface on which you are enabling MPLS LDP:
switch(config)# interface ethernet 2/2
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
180
interface ethernet slot/chassis number
no interface ethernet slot/chassis number
Slot or chassis number. The range is from 1 to 253.
Modification
This command was introduced.
Description
Protocol (LDP).
I Commands
OL-24994-01