Show Ethernet Service Interface - Cisco ME 3400 Command Reference Manual

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

show ethernet service interface

Use the show ethernet service interface privileged EXEC command to display interface-based
information about Ethernet customer-service instances for all interfaces or a specified interface.
This command is available only if your switch is running the metro IP access or metro access image.
Syntax Description
interface-id
detail
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEG
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
These are examples of outputs from the show ethernet service interface commands:
Switch# show ethernet service interface gigabitethernet0/1
Interface
GigabitEthernet0/1 PE2-G101
Switch# show ethernet service interface detail
Interface: FastEthernet0/1
ID:
CE-VLANS:
EVC Map Type: Bundling-Multiplexing
Interface: FastEthernet0/2
ID:
CE-VLANS:
EVC Map Type: Bundling-Multiplexing
Interface: FastEthernet0/3
ID:
CE-VLANS:
EVC Map Type: Bundling-Multiplexing
<output truncated>
OL-9640-07
show ethernet service interface [interface-id] [detail] [ | {begin | exclude | include} expression]
(Optional) Display service-instance information for the specified interface.
(Optional) Display detailed information about service instances on all
interfaces or the specified interface.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Identifier
Cisco ME 3400 Ethernet Access Switch Command Reference
show ethernet service interface
2-393