Show Ethernet Service Interface - Cisco Catalyst 3750 Metro Command Reference Manual

show ethernet service interface

show ethernet service interface
Use the show ethernet service interface privileged EXEC command to display interface-based
information about Ethernet customer-service instances for all interfaces or a specified interface.
Syntax Description interface-id
detail
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEG
Examples
These are examples of outputs from the show ethernet service interface commands:
Switch# show ethernet service interface gigabitethernet0/1
Interface
GigabitEthernet0/1 PE2-G101
Switch# show ethernet service interface detail
Interface: FastEthernet0/1
ID:
CE-VLANS:
EVC Map Type: Bundling-Multiplexing
Interface: FastEthernet0/2
ID:
CE-VLANS:
EVC Map Type: Bundling-Multiplexing
Interface: FastEthernet0/3
ID:
CE-VLANS:
EVC Map Type: Bundling-Multiplexing
<output truncated>
Interface: GigabitEthernet0/1
ID: PE2-G101
CE-VLANS: 10,20,30
EVC Map Type: Bundling-Multiplexing
Associated EVCs:
EVC-ID CE-VLAN
WHITE 30
RED 20
BLUE 10
Associated Service Instances:
Service-Instance-ID CE-VLAN
10 10
20 20
30 30
Catalyst 3750 Metro Switch Command Reference
2-468
show ethernet service interface [interface-id] [detail]
(Optional) Display service-instance information for the specified interface.
(Optional) Display detailed information about service instances on all
interfaces or the specified interface.
Modification
This command was introduced.
Identifier
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
OL-9645-10