Show Scsi-Flow - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 22-8
Table 22-8
Field
Initiator Verification
Status
Target Verification Status Verifies that the names sever and zone server information for the target
Initiator Linecard Status
Target Linecard Status
The following example displays SCSI flow services configuration for a specific SCSI flow identifier.
switch# show scsi-flow flow-id 3
Flow Id: 3
The following example displays SCSI flow services statistics for all SCSI flow identifiers.
switch# show scsi-flow statistics
Stats for flow-id 4 LUN=0x0000
------------------------------
Read Stats
I/O Total count=2
OL-18089-01, Cisco MDS NX-OS Release 4.x
Initiator Linecard Status:
Target Linecard Status:
Feature Status:
---------------
Write-Acceleration enabled
Write-Acceleration Buffers: 1024
Configuration Status:
describes the significant fields shown in the show scsi-flow command output.
show scsi-flow Field Descriptions
Description
Verifies that the name server, FLOGI server, and zone server information
for the initiator on the local switch are correct.
on the local switch are correct.
Verifies that the initiator is connected to an SSM and if DPP provisioning
is enabled for the module.
Verifies in the following order:
1. The target switch sees the proper name server and zone server
information for the initiator.
2. The target switch sees the proper name server, FLOGI server and zone
server information for the target.
3. The target is connected to an SSM and if DPP provisioning is enabled
for that module.
Initiator VSAN: 101
Initiator WWN: 21:00:00:e0:8b:05:76:28
Target VSAN: 102
Target WWN: 21:00:00:20:37:38:7f:7d
Target LUN: ALL LUNs
Flow Verification Status:
-------------------------
Initiator Verification Status:
Target Verification Status:
Initiator Linecard Status:
Target Linecard Status:
Feature Status:
---------------
Write-Acceleration enabled
Write-Acceleration Buffers: 1024
Configuration Status:
Statistics enabled
Configuration Status:
success
success
success
success
success
success
success
success
success
Cisco MDS 9000 Family Command Reference

show scsi-flow

22-367