Show Flow Exporter - Cisco Catalyst 3650 series Command Reference Manual

show flow exporter

show flow exporter
To display flow exporter status and statistics, use the show flow exporter command in privileged EXEC
mode.
show flow exporter [broker [detail| picture]| export-ids netflow-v9| [name] exporter-name [statistics|
templates]| statistics| templates]
Syntax Description
broker
detail
picture
export-ids netflow-v9
name
exporter-name
statistics
templates
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SE
Examples
The following example displays the status and statistics for all of the flow exporters configured on a device:
Device# show flow exporter
Flow Exporter FLOW-EXPORTER-1:
Description:
Export protocol:
Transport Configuration:
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
462
(Optional) Displays information about the state of the broker for the Flexible
NetFlow flow exporter.
(Optional) Displays detailed information about the flow exporter broker.
(Optional) Displays a picture of the broker state.
(Optional) Displays the NetFlow Version 9 export fields that can be exported
and their IDs.
(Optional) Specifies the name of a flow exporter.
(Optional) Name of a flow exporter that was previously configured.
(Optional) Displays statistics for all flow exporters or for the specified flow
exporter.
(Optional) Displays template information for all flow exporters or for the
specified flow exporter.
Destination IP address: 192.168.0.1
Source IP address:
Modification
This command was introduced.
Exports to the datacenter
NetFlow Version 9
192.168.0.2