Limiting Syslog Messages Sent To The History Table And To Snmp - Cisco Catalyst 9500 Manual

Limiting Syslog Messages Sent to the History Table and to SNMP

Command or Action
Step 2 logging console level
Example:
Device(config)# logging console 3
Step 3
logging monitor level
Example:
Device(config)# logging monitor 3
Step 4 logging trap level
Example:
Device(config)# logging trap 3
Step 5
end
Example:
Device(config)# end
Limiting Syslog Messages Sent to the History Table and to SNMP
This task explains how to limit syslog messages that are sent to the history table and to SNMP.
This task is optional.
SUMMARY STEPS
1. configure terminal
2. logging history level
3. logging history size number
4. end
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Device# configure terminal
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
164
Purpose
Limits messages logged to the console.
By default, the console receives debugging messages and
numerically lower levels.
Limits messages logged to the terminal lines.
By default, the terminal receives debugging messages and
numerically lower levels.
Limits messages logged to the syslog servers.
By default, syslog servers receive informational messages
and numerically lower levels.
Returns to privileged EXEC mode.
Purpose
Enters global configuration mode.
Configuring System Message Logs