Downloading Files From Cco; Displaying The Ip Address Of The Tftp Server - Cisco Catalyst 2900 XL Series Installation And Configuration Manual

Upgrading the Module Software

Downloading Files from CCO

Follow these steps to download the new software and TFTP server application:
Step 1
Step 2
Step 3
Step 4
Step 5

Displaying the IP Address of the TFTP Server

Before you can download new software to your module, you need to enter the IP address
of your PC or workstation on the System Management page. If you are running the Cisco
TFTP server, the PC IP address is displayed on the application title bar.
If you do not know the IP address, follow these steps to display it:
•
•
•
4-6
Catalyst 2900 Series XL ATM Modules Installation and Configuration Guide
Display the Cisco home page by pointing your browser to one of the following
URLs:
http://www.cisco.com
http://www-china.cisco.com
http://www-europe.cisco.com.
Log into CCO. You might need to register the first time you log in.
To locate the software files from the home page, select Service and Support >
Software Center > Cisco IOS Software > Cisco IOS 12.0 > 2900atm.
Follow the instructions on the page to download the IOS image.
Follow the instructions on the page to download and configure the TFTP server.
For a Windows NT system, enter the command ipconfig at the DOS prompt.
For a Windows 95 system, enter the command winipcfg from the Windows
Start > Run menu.
From a UNIX workstation, enter ifconfig -a or look at the /etc/hosts file.