Limiting Syslog Messages Sent To The History Table And To Snmp - Cisco Catalyst 9400 System Management Configuration Manual

Configuring System Message Logs
Step 2
Step 3
Step 4
Step 5

Limiting Syslog Messages Sent to the History Table and to SNMP

This task explains how to limit syslog messages that are sent to the history table and to SNMP.
This task is optional.
Procedure
Step 1
Step 2
Step 3
Command or Action
logging console level
Example:
Device(config)# logging console 3
logging monitor level
Example:
Device(config)# logging monitor 3
logging trap level
Example:
Device(config)# logging trap 3
end
Example:
Device(config)# end
Command or Action
configure terminal
Example:
Device# configure terminal
logging history level
Example:
Device(config)# logging history 3
logging history size number
Example:
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
Limiting Syslog Messages Sent to the History Table and to SNMP
Purpose
Limits messages logged to the console.
By default, the console receives debugging
messages and numerically lower levels.
Limits messages logged to the terminal lines.
By default, the terminal receives debugging
messages and numerically lower levels.
Limits messages logged to the syslog servers.
By default, syslog servers receive informational
messages and numerically lower levels.
Returns to privileged EXEC mode.
Purpose
Enters global configuration mode.
Changes the default level of syslog messages
stored in the history file and sent to the SNMP
server.
By default, warnings, errors, critical, alerts,
and emergencies messages are sent.
Specifies the number of syslog messages that
can be stored in the history table.
267