Snmp-Server Contact - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

snmp-server contact

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
snmp-server contact
To modify system contact, use the snmp-server contact command in configuration mode. To remove
the SNMP servere contact, use the no form of the command.
Syntax Description line
Defaults
None.
Command Modes Configuration mode.
Command History Release
4.1(1b)
Usage Guidelines
None.
Examples
The following example shows how to modify syscontact.
switch# config t
switch(config)# snmp-server contact line
switch(config)#
switch(config)# no snmp-server contact line
switch(config)#
Related Commands Command
show snmp
Cisco MDS 9000 Family Command Reference
21-42
snmp-server contact [line]
no snmp-server contact [line]
(Optional) Modifies the system contact.
Modification
This command was introduced.
Description
Displays SNMP information.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x