[Cm52] Hot Line/Delayed Hotline - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
52
FUNCTION:
This command is used to assign a Hot Line/Delayed Hotline to stations, Attendant Consoles and trunks.
PRECAUTION:
(1) Maximum number of Hot Lines/Delayed Hotlines is 100, and the connection is one way from
calling side to called side. For connection in the opposite direction, the calling and called side must
be assigned to another Hot Line/Delayed Hotline number. If all the Hot Lines/Delayed Hotlines
are to be made bothway lines, the maximum number of Hot Lines/Delayed Hotlines is 50.
(2) The station number to be assigned as Calling Side should have been set as "Hot Line/Delayed
Hotline" via CM12 Y=03.
(3) If Hot Line-Outside/Delayed Hotline-Outside is assigned by CM52, data assignment via CM71
and CM72 are required.
ASSIGNMENT PROCEDURE:
+ 52YY +
ST DE
HOT LINE/DELAYED HOTLINE
CALLING SIDE/
+ +
CALLED SIDE
(1 digit)
DATA
+ +
DE
(1-8 digits)
– 474 –
EXE
NWA-008844-001 Rev.5.0
CM52
91ch3005.fm
JULY/01/2006