Memory Map - Sharp LH79524 User Manual

LH79524/LH79525 User's Guide
10.2 Register Reference
This section describes the registers used in I

10.2.1 Memory Map

The base address for the I
Locations at offsets 0x018 through 0xFFF are reserved and must not be used during
normal operation. Table 10-1 shows the memory mapping.
2
S Converter is 0xFFFC8000.
2
Table 10-1. I S Converter Register Summary
ADDRESS
NAME
OFFSET
0x000 CTRL Control Register
0x004 STAT Status Register
0x008 IMSC
0x00C RIS
0x010 MIS
0x014 ICR
0x018 - 0xFFF ///
Version 1.0
2
S Converter.
DESCRIPTION
Interrupt Mask Set and Clear Register.
Raw Interrupt Status register
Masked Interrupt Status Register
Interrupt Clear Register
Reserved — Do not access
2
I S Converter
10-13