Table 2-1. Adc Register Summary; Register Reference - Sharp LH79524 User Manual

Analog-to-Digital Converter/Brownout Detector

2.2 Register Reference

This section provides the ADC and Brownout Detector register memory mapping and
bit fields.
2.2.1 Memory Map
The base address for the ADC is 0xFFFC3000.
Table 2-1 Summarizes the ADC registers. Address offsets in the table are from the base
address. All registers are little endian format.
2-10

Table 2-1. ADC Register Summary

ADDRESS
NAME
OFFSET
0x00 HW
0x04 LW
0x08 RR
0x0C IM
0x10 PC
0x14 GC
0x18 GS
0x1C IS
0x20 FS
0x24 - 0x60 HWCB0 - HWCB15 High Word Control Bank Registers
0x64 - 0xA0 LWCB0 - LWCB15
0xA4 IHWCTRL
0xA8 ILWCTRL
0xAC MIS
0xB0 IC
Version 1.0
LH79524/LH79525 User's Guide
DESCRIPTION
High Word Register
Low Word Register
Results Register
Interrupt Masking Register
Power Configuration Register
General Configuration Register
General Status Register
Interrupt Status Register
FIFO Status Register
Low Word Control Bank Registers
Idle High Word Registers
Idle Low Word Registers
Masked Interrupt Status
Interrupt Clear Register