Item
4
5
1
The liquid cooling heatsink has two pumps for redundancy.
System maintenance switch descriptions
Position
1
S1
S2
S3
S4
1
S5
1,2 3
S6
S7
S8
S9
S10
S11
S12
1
To access the redundant ROM, set S1, S5, and S6 to On.
2
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all
configuration settings to their manufacturing defaults.
3
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some
configurations cannot be restored. For more information, see Configuring the server.
DIMM label identification
To determine DIMM characteristics, see the label attached to the DIMM. The information in this section helps
you to use the label to locate specific information about the DIMM.
17
Component identification
Description
Coolant tubes
Pump-cold plate
Default
Function
Off
•
Off—iLO security is enabled.
•
On—iLO security is disabled.
Off
Reserved
Off
Reserved
Off
Reserved
Off
•
Off—Power-on password is enabled.
•
On—Power-on password is disabled.
Off
•
Off—No function
•
On—Restore default manufacturing settings
Off
Reserved
Off
Reserved
Off
Reserved
Off
Reserved
Off
Reserved
Off
Reserved
1