Server Blade - Hitachi HVM Navigator V03-06 User Manual

LPAR status
It is necessary that the following requirements shown in the following table are
fulfilled.
Table 2-9 Requirements of LPAR status
LPAR Status
Act (Activated)
Dea (Deactivated)
Fai (Failure)
* It is necessary that remote shutdown is set when executing LPAR migration in Shutdown mode.
For the setting for the remote shutdown, see "Executing migration with automatic shutdown of
source LPAR" in "Other functions and settings".
Guest OS
All guest OSes supported on an HVM on each of CB 2000, CB 500, and CB2500
can migrate in Shutdown mode.
Requirement of source and destination server blades
Version of the management module
You can execute LPAR migration in Shutdown mode regardless of version of
the management module.
Dictionary version
You can execute LPAR migration in Shutdown mode regardless of Dictionary
version.

Server blade

Location
You cannot execute LPAR migration in Shutdown mode from an LPAR number
to another within a server blade. For location between the source and
destination server blades which you can execute LPAR migration in Shutdown
mode, check the following table.
Table 2-10 Requirements of location between source and destination
server blades
Within a server blade
From a server blade to another within a server chassis
From a server blade in a chassis to another server blade in another chassis
HVM Navigator User's Guide - Migration
Location
Usage environments
Shutdown
Migratable
Yes*
Yes
No
Migratable
No
Yes
Yes
2-15