Downloading System Software - Canon imageRUNNER ADVANCE C350 series Service Manual

● Downloading System Software
The system software is stored in the temporary storage space of the FLASH PCB immediately
after downloading from the PC. When this machine is restarted after the download process,
the system software is written in the system area of the FLASH PCB and the data in the
temporary storage space is deleted.
This machine is automatically restarted after the writing process is completed. When the
writing process is successfully completed, the machine is restarted with the new version of
the system software. When an error occurs, the machine restarted with previous version of
the system software.
Download the system software
1)
System
Software
2) Automatically restarted
The system software is written
3)
<<<<< download shell >>>>>
[ SYSTEM JPja-m ] - - - - Upgrading complete
[ SYSTEM ZZ ] - - - - - - - Upgrading complete
[ SYSTEM JPja-w ] - - - - Upgrading complete
[ SYSTEM ZZ ] - - - - - - - Upgrading complete
[ FONT F ] - - - - - - - - - - Upgrading complete
[ FONT G ] - - - - - - - - - - Upgrading complete
+++ Switch OFF the power then ON. +++
FLASH
Temporary
memory space
System
memory area
System
Software
6
Troubleshooting > Version Upgrade > Version Upgrade via SST > Registering System Software
- - - Download Mode - - -
[ iR2270i-JPjaxxxx-MN.dsh ] - - - - - - - - - - Complete
[ iR2270iM-JPjaxxxx-1F77-MN.PRG ] - - - - Complete
[ iR2270iM-ZZjaxxxx-49AD.PRG ] - - - - - - - Complete
[ iR2270iW-JPjaxxxx-5C16-MN.PRG ] - - - -
Complete
[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - - Complete
[ iR2270iF-JPjaxxxx-DE96-ICC.PRG ] - - - - Complete
[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - - Complete
[ iR2270iG-JPjaxxxx-EC30-ICC.PRG ] - - - - Complete
FLASH
Temporary
memory space
System
Software
System
memory area
4) Automatically restarted
主電源スイッチOFF/ON
5) Start with the new version.
F-6-20
6 Troubleshooting > Version Upgrade > Version Upgrade via SST > Registering System Software
■ Registering System Software
● System file storage folder to SST
Register the system software stored in the system file storage folder to SST.
NOTE:
When the system software has been compressed, decompress the compression file
and then register the file to SST.
Preparation
Requirements:
• PC with SST Ver.4.73 or later installed
• The system software for this machine
Steps to register the system software
1) Start the PC.
2) Start SST.
3) Click the "Register System Software" button.
6-21
F-6-21
6-21