Downloading System Software - Canon imagePRESS 1135 Series Service Manual

Downloading System Software

■ Outline
Batch download enables to download various system software collectively.
Combinations of the system software that will be downloaded with batch download are stated
in the batch download information file ("ALL").
At batch download, each system software in specific version will be downloaded according to
the combination stated in "ALL" file.
There are 2 modes such as Normal mode and Assist mode available for batch download.
Normal mode enables to download in the same manner as existing SST.
Assist mode is a user-friendly mode that has been added to SST version 4.02 or later
(recommended). See the following features.
• Identifies the connected model automatically.
Since this identifies the connected model automatically, users do not have to specify the
model name. Moreover, users can continue to download to the multiple devices by simply
switching the connection after download.
• Identifies the version of system software automatically.
If the combination of system software that is registered in SST is newer than the
combination on a device, the new combination is selected automatically.
If not, it will not be selected. The combination can be selected manually if needed.
• Identifies the download mode (normal / safe) of the machine automatically.
Since SST identifies the download mode of the machine, the message prompting the
operation to switch the download mode etc. will be displayed when required.
6
Troubleshooting > Version Upgrade > Downloading System Software > Outline
6 Troubleshooting > Version Upgrade > Downloading System Software > Outline
MEMO : Startup mode setting
Users can make a setting to transfer to Assist mode automatically when starting SST.
1) Click [System Management] in main menu.
Service Support Tool DLM0 (Ver. X.XX E)
Target Selection CONTROL
Select the target.
Click a button to execute.
MFP
CONNECT
MFP
R egister Firmwa re
USB
D elete Fir mw are
D elete Ba ckup Da ta
USB System Man age ment
c:
START
Star t Assist Mod e
EXIT
2) Click [Assist Mode Settings].
Service Support Tool DLM0 (Ver. X.XX E)
System Manage 1 CONTROL
Click a button to execute.
Change Firmware Drive
Ver. Info.
CONNECT
COM Port Select
Register Firmware
USB Adapter Timeout Setting
Delete Firmware
Assist Mode Settings
Delete Backup Data
System Management
Change
CANCEL
EXIT
6-46
Model List
Select a model to connect
F-6-61
SST Ver.
System Manage 2
F-6-62
6-46