Canon imageRUNNER ADVANCE C350 series Service Manual page 953

COPIER> OPTION> LCNS-TR
ST-PS Install state display of PS function
Lv.2 Details To display installation state of PS function when disabling the
function with license transfer.
Use case When checking whether PS function is installed
Adj/set/operate method 1) Select ST-PS.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PS.
Display/adj/set range When operation finished normally: OK!
Default value According to the setting at shipment
TR-PS Transfer license key dspl of PS function
Lv.2 Details To display transfer license key to use PS function when the function
is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-PS.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PS.
Display/adj/set range 24 digits
ST-PCL Install state display of PCL function
Lv.2 Details To display installation state of PCL function when disabling the
function with license transfer.
Use case When checking whether PCL function is installed
Adj/set/operate method 1) Select ST-PCL.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PCL.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-PCL Transfer license key dspl: PCL function
Lv.2 Details To display transfer license key to use PCL function when the function
is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-PCL.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PCL.
Display/adj/set range 24 digits
8
Service Mode > COPIER > OPTION > LCNS-TR
8 Service Mode > COPIER > OPTION > LCNS-TR
COPIER> OPTION> LCNS-TR
ST-PSLI5 Installation state display of PS/UFR II
Lv.2 Details To display installation state of PS/UFR II function when disabling the
function with license transfer.
Use case When checking whether PS/UFR II is installed
Adj/set/operate method 1) Select ST-PSLI5.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PSLI5.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-PSLI5 Transfer license key dspl of PS/UFR II
Lv.2 Details To display transfer license key to use PS/UFR II function when the
function is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-PSLI5.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PSLI5.
Display/adj/set range 24 digits
ST-LIPS5 Installation state display of UFR II
Lv.2 Details To display installation state of UFR II function when disabling the
function with license transfer.
Use case When checking whether UFR II function is installed
Adj/set/operate method 1) Select ST-LIPS5.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-LIPS5.
Display/adj/set range When operation finished normally: OK!
Default value According to the setting at shipment
TR-LIPS5 Transfer lcns key dspl: UFR II function
Lv.2 Details To display transfer license key to use UFR II function when the
function is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-LIPS5.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-LIPS5.
Display/adj/set range 24 digits
8-183
8-183