Work Procedure - Canon imageRUNNER ADVANCE C350 series Service Manual

2
Technical Explanation > MEAP > Maintenance > Collection of MEAP Console Logs
4) Press the 0 key on the control panel keypad to change the setting to "0"; then, press [OK].
5) Start service mode again after rebooting the device, and check that the displayed setting
value has changed to "0" and that [MPSF] is no longer displayed at the upper left of the
screen.
2 Technical Explanation > MEAP > Maintenance > Collection of MEAP Console Logs
■ Collection of MEAP Console Logs
● Overview
When debugging a MEAP application, console logs need to be collected in some cases.
The following shows how to collect MEAP console logs using commercially available terminal
software and service mode.
● What to Prepare
• PC connected with the same network as the device
• Commercially available terminal software
F-2-304
● Work Procedure
Device Setting Procedure
1) Start [SERVICE MODE] in Level 1.
2) Press [COPIER] > [Option] > [DSPLY-SW].
F-2-305
Note:
In the procedure shown in this manual, "Tera Term Pro" and "Hyper Terminal" are used
as the terminal software.
2-183
F-2-306
2-183