Canon imageRUNNER ADVANCE C350 series Service Manual page 471

4
Disassembly/Assembly > Pickup/Feed System > Removing the Registration/Pickup Unit > Procedure after replacement When images with uneven density (white spots) are generated after re
4) Loosen the 2 screws [2] of the Registration/Pickup Unit [1].
2x
[2]
5) Lift the Registration/Pickup Unit [1], and tighten the 2 screws [2].
[1]
4 Disassembly/Assembly > Pickup/Feed System > Removing the Registration/Pickup Unit > Procedure after replacement When images with uneven density (white spots) are generated after re
[1]
F-4-436
2x
[2]
[2]
F-4-437
6) Assemble the Registration/Pickup Unit, output a test print, and confirm that images with
uneven density (white spots) are not generated.
7) End if images with uneven density (white spots) are not generated.
Adjust again the Registration/Pickup Unit if images with uneven density (white spots) are
generated.
4-164
F-4-438
4-164