Canon imageRUNNER ADVANCE C350 series Service Manual page 801

■ USER
COPIER> DISPLAY>USER
SPDTYPE Display of engine speed type
Lv.1 Details To display the engine speed type of this machine.
Use case When checking the engine speed type
Adj/set/operate method N/A (Display only)
Display/adj/set range 25 to 35
BRWS-STS Display of service browser ON/OFF
Lv.1 Details To display whether the service browser can be used.
If the value is 1, [Service Browser] button is displayed on the service
mode initial screen.
The value of BRWS-STS switches whenever COPIER> FUNCTION>
INSTALL> BRWS-ACT is executed, but ON/OFF of service browser
is enabled after reboot. If the service browser does not start even
though the value of BRWS-STS is 1, turn OFF/ON the main power
switch.
Use case When checking the operation mode of the service browser
Adj/set/operate method N/A (Display only)
Caution The value of BRWS-STS is linked with COPIER> FUNCTION>
INSTALL> BRWS-ACT, but the service browser cannot start even
though 1 is displayed unless the main power switch is turned OFF/
ON.
Display/adj/set range 0 to 2
0: OFF (Not available), 1: ON (Available), 2: OFF (Not available)
Related service mode COPIER> FUCNTION> INSTALL> BRWS-ACT
8
Service Mode > COPIER > DISPLAY > ACC-STS
T-8-4
8 Service Mode > COPIER > DISPLAY > ACC-STS
■ ACC-STS
COPIER> DISPLAY> ACC-STS
FEEDER Display of DADF connection state
Lv.1 Details To display the connecting state of DADF.
Use case When checking the connection between the machine and DADF
Display/adj/set range 0 to 1
0: Not connected, 1: Connected
SORTER Connect state of Finisher-related option
Lv.1 Details To display the connecting state of Finisher-related options.
Use case When checking the connection of Finisher-related options
Display/adj/set range Left column (connecting state of Finisher-related options): 1 to 5
1: Without Saddle
2: With Saddle, without Folding Unit
3: With Saddle and Inserter, without Folding Unit
4: With Saddle and Folding Unit, without Inserter
5: With Saddle, Inserter and Folding Unit
Right column (connecting state of Finisher-belonged Inserter): 0 to 4
0: no hole, 1: 2-hole, 2: 2/3-hole, 3: 4-hole, 4: 4-hole (SW)
CARD Dspl of connection state of Card Reader
Lv.1 Details To display the connecting state of Card Reader.
Use case When checking the connection between the machine and the Card
Reader
Display/adj/set range 0 to 1
0: No card is inserted while the Card Reader is connected. (Copy is
not available.)
1: Card Reader is not connected, or card is inserted while the Card
Reader is connected. (Copy is available.)
RAM Display of MNCON PCB memory capacity
Lv.1 Details To display the memory capacity of the Main Controller PCB.
Use case When checking the memory capacity of the machine
Display/adj/set range 1024 (Fixed)
COINROBO Dspl of Coin Manager connection state
Lv.1 Details To display the connecting state of the Coin Manager.
Use case When checking the connection between the machine and the Coin
Manager
Display/adj/set range 0 to 1
0: Not connected, 1: Connected
NIB Display of Network PCB connection state
Lv.1 Details To display the connecting state of the Network PCB.
Use case When checking the connection between the machine and the
Network PCB
Display/adj/set range 0 to 3
0: Not connected, 1: Ethernet PCB connected, 2: Token Ring PCB
connected, 3: Ethernet PCB + Token Ring PCB connected
HDD Display of HDD model name
Lv.1 Details To display the model name of HDD.
Use case When checking the model name of HDD used on the machine
8-31
8-31