Serial Interface Kit-K - Canon imageRUNNER ADVANCE C350 series Service Manual

Serial Interface Kit-K2 / Copy Control Interface Kit-A1
Points to Note at Installation
The following options cannot be used in combination with this equipment.
• Serial Interface Kit
• Copy Control Interface Kit
• Copy Card Reader
Check Items when Turning OFF the Main Power
Check that the main power switch is OFF
Turn OFF the main power switch of the host machine.
Check that display in the Control Panel and the lamp of the main power are turned off, then
disconnect the power plug.
Installation Outline Drawing
9
Installation > Serial Interface Kit-K2 / Copy Control Interface Kit-A1 > Checking the Contents > Serial Interface Kit-K2

■ Serial Interface Kit-K2

F-9-17
9 Installation > Serial Interface Kit-K2 / Copy Control Interface Kit-A1 > Checking the Contents > Serial Interface Kit-K2
Checking the Contents
[1] Sereal RS Conversion [2] Support Plate X 1
Board X 1
[4] Screw (TP; M3x6) X 3 [5] Hexagonal Screw X 2
[7] PCB Spacer X 1 [8] IA Harness
Protection Sheet X 1
9-9
[3] RS Conversion Cable
X 1
[6] Washer X 2
[9] RS Conversion Cable
X 1
F-9-18
9-9