Canon imageRUNNER ADVANCE C350 series Service Manual page 267

2
Technical Explanation > Updater > Preparation > Setting Sales Company's HQ
Preparation
■ Overview of Preparation
The following should be prepared before using Updater.
• For updating of firmware
Setting Sales
Installation Network
Company's
Method Settings
HQ
UGW-linked
Download and Yes Yes
Update
UGW-linked
Yes Yes
Download
Manual Download
Yes Yes
and Update
Manual Download
and Update via Yes Yes
Local UI
Manual Download
and Update via Yes Yes
Remote UI
Special Download
and Update via Yes -
Remote UI
• For Install of Application
Installation Method Network Settings
LMS-linked Installation
LMA-linked installation via Local UI
LMS-linked installation via Remote UI
2 Technical Explanation > Updater > Preparation > Setting Sales Company's HQ
Enabling [Manual
Enabling Enabling [Update
Update] Button of
UGW Link Firmware] Button
Remote UI
Yes - -
Yes - -
- - -
- Yes -
- Yes -
- - Yes
Enabling [Install Application/
Options] Button
Yes -
Yes Yes
Yes Yes
■ Setting Sales Company's HQ
When using devices input in the markets listed below, the default setting of Sales Company's
HQ should be changed before obtaining firmware distributed from CDS. Unless the setting is
changed properly, the desired firmware may not be able to be selected.
Market
Canada
Latin America
Hong Kong
Go to the following screen to change the setting of Sales Company's HQ.
Service Setting of Device Service Mode
Technician (Level 1)
NOTE:
The list below shows the setting of Sales Company's HQ for CDS-CTS by market.
Check and adhere to the appropriate setting for your market.
<List of Sales Company's HQ and the settings for CDS-CTL>
Japan = JP
USA = US
Singapore = SG
T-2-94
Europe = NL
Korea = KR
T-2-95
Default Setting of Sales Setting of Sales Company's
Company's HQ HQ after Change
US CA
US/SG LA
SG HK
COPIER > FUNCTION > INSTALL > CDS-CTL
China = CN
Hong Kong = HK
Australia = AU
Canada = CA
Latin America= LA
2-224
T-2-96
2-224