Canon imageRUNNER ADVANCE C350 series Service Manual page 975

FUNCTION
FEEDER> FUNCTION
FEED-CHK Specify DADF individual feed mode
Lv.1 Details To specify the feed mode for DADF.
Feed operation is activated by FEED-ON.
Use case When checking the operation of the DADF Motor
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 0 to 1
0: 1-sided pickup/delivery, 1: 2-sided pickup/delivery
Related service mode FEEDER> FUNCTION> FEED-ON
MTR-ON Operation check of DADF Motor
Lv.1 Details To drive the DADF Motor for approximately 5 seconds.
Use case When checking the operation of the DADF Motor
Adj/set/operate method 1) Select the item, and then press OK key.
It is driven for approximately 5 seconds and is automatically stopped.
2) Press OK key.
The operation check is completed.
Caution Be sure to press the OK key again after execution. The operation
automatically stops after approximately 5 seconds, but is not
completed unless the OK key is pressed (STOP is not displayed).
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
FEED-ON Operation check of DADF individual feed
Lv.1 Details To start operation check of the feed mode specified by FEED-CHK.
Use case When checking the operation of the DADF Motor
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode FEEDER> FUNCTION> FEED-CHK
8
Service Mode > FEEDER > FUNCTION
T-8-70
8 Service Mode > FEEDER > FUNCTION
8-205
8-205