Canon imageRUNNER ADVANCE C350 series Service Manual page 825

COPIER> ADJUST> CCD
50DF-RG RG clr displace crrct: 300dpi DADF mode
Lv.1 Details To correct the color displacement (R and G lines) in vertical scanning
direction due to the Scanner Unit (paper front) occurs at DADF
reading with 300 dpi.
When replacing the Scanner Unit, enter the value of service label on
the unit.
When replacing the Main Controller PCB/clearing the Reader-related
RAM data, enter the value of the service label on the reader.
Use case - When replacing the Scanner Unit
- When replacing the Main Controller PCB/clearing the Reader-
related RAM data
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
service label.
Display/adj/set range -512 to 512
Unit 0.001 line
Default value -333
50DF-GB GB clr displace crrct: 300dpi DADF mode
Lv.1 Details To correct the color displacement (G and B lines) in vertical scanning
direction due to the Scanner Unit (paper front) occurs at DADF
reading with 300 dpi.
When replacing the Scanner Unit, enter the value of service label on
the unit.
When replacing the Main Controller PCB/clearing the Reader-related
RAM data, enter the value of the service label on the reader.
Use case - When replacing the Scanner Unit
- When replacing the Main Controller PCB/clearing the Reader-
related RAM data
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
service label.
Display/adj/set range -512 to 512
Unit 0.001 line
Default value 333
8
Service Mode > COPIER > ADJUST > CCD
8 Service Mode > COPIER > ADJUST > CCD
COPIER> ADJUST> CCD
100DF-RG RG clr displace crrct: 600dpi DADF mode
Lv.1 Details To correct the color displacement (R and G lines) in vertical scanning
direction due to the Scanner Unit (paper front) occurs at DADF
reading with 600 dpi.
When replacing the Scanner Unit, enter the value of service label on
the unit.
When replacing the Main Controller PCB/clearing the Reader-related
RAM data, enter the value of the service label on the reader.
Use case - When replacing the Scanner Unit
- When replacing the Main Controller PCB/clearing the Reader-
related RAM data
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
service label.
Display/adj/set range -512 to 512
Unit 0.001 line
Default value -333
100DF-GB GB clr displace crrct: 600dpi DADF mode
Lv.1 Details To correct the color displacement (G and B lines) in vertical scanning
direction due to the Scanner Unit (paper front) occurs at DADF
reading with 600 dpi.
When replacing the Scanner Unit, enter the value of service label on
the unit.
When replacing the Main Controller PCB/clearing the Reader-related
RAM data, enter the value of the service label on the reader.
Use case - When replacing the Scanner Unit
- When replacing the Main Controller PCB/clearing the Reader-
related RAM data
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
service label.
Display/adj/set range -512 to 512
Unit 0.001 line
Default value 333
8-55
8-55