Removing The Fixing Drive Unit - Canon imageRUNNER ADVANCE C350 series Service Manual

4
Disassembly/Assembly > Fixing System > Removing the Fixing Drive Unit > Preparation
2) Hold the 2 Release Levers [1] of the Fixing Assembly, and remove the Fixing Assembly [2].
[1]
NOTE: How to install the Fixing Assembly
Be sure to push the Release Lever [A] of the Fixing Assembly with your finger until it
locks.
[A]
4 Disassembly/Assembly > Fixing System > Removing the Fixing Drive Unit > Preparation
[1]
[2]
F-4-357
[A]
F-4-358

Removing the Fixing Drive Unit

■ Preparation
1) Remove the Rear Cover 1(Refer to page 4-35).
2) Remove the Left Upper Cover (to be removed for models equipped with a fax)
(Refer to page 4-37).
3) Remove the Fax Speaker Unit (to be removed for models equipped with a fax)
(Refer to page 4-105).
4) Remove the Fax Unit (to be removed for models equipped with a fax)
(Refer to page 4-105).
5) Remove the Main Controller Unit(Refer to page 4-84).
6) Remove the Low-voltage Power Supply PCB Unit(Refer to page 4-97).
7) Remove the DC Controller PCB Unit(Refer to page 4-90).
8) Remove the Fixing Assembly(Refer to page 4-139).
9) Remove the Delivery/Reverse Unit (Refer to page 4-165).
4-140
F-4-359
4-140