Canon imageRUNNER ADVANCE C350 series Service Manual page 463

4
Disassembly/Assembly > Pickup/Feed System > Reassembling when the Multi-purpose Tray Separation Roller Shaft is detached > Reassembling when the Multi-purpose Tray Separation Roller Shaft is detache
6) Assemble the Torque Limiter [2] on the Multi-purpose Tray Separation Roller Shaft [1].
CAUTION:
Be sure to align the groove [A] of the Torque Limiter [2] with the protrusion [B] of the
Multi-purpose Tray Separation Roller Shaft [1] to assemble.
[B] [2]
[2]
4 Disassembly/Assembly > Pickup/Feed System > Reassembling when the Multi-purpose Tray Separation Roller Shaft is detached > Reassembling when the Multi-purpose Tray Separation Roller Shaft is detache
[A]
[1]
F-4-408
[1]
F-4-409
7) Assemble the Separation Roller [2] on the Multi-purpose Tray Separation Roller Shaft [1].
• 1 Claw [3]
CAUTION:
Be sure to align the groove [A] of the Separation Roller [2] with the protrusion [B] of the
Torque Limiter [4] to assemble.
[4]
[B]
[2]
1x
[3]
[1]
Be sure to reassemble according to steps 7 to 1 by referring to the Assembly Procedure.
4-156
[2]
[A]
F-4-410
F-4-411
4-156