After Installation - Canon imageRUNNER ADVANCE C350 series Service Manual

3) Connect the CC-VI Cable to the Main Controller PCB.
• 2 Hexagon Screws (Nuts will not be used.)
• 2 Spring Washers (Small)
• 2 Washers (Large)
• 1 Connector
CAUTION:
Install the CC-VI Cable in the direction shown in the figure.
2x
9
Installation > Serial Interface Kit-K2 / Copy Control Interface Kit-A1 > Installation Procedure > After Installation

■ After Installation

1) Return the covers to their original positions.
<Without Cassette feeding Unit>
• Controller Box Cover (1 screw, 2 Connectors)
• Small Cover of the Controller Box Cover (1 screw)
• Rear Cover (5 screws)
• Reader Rear Cover
F-9-32
F-9-33
9 Installation > Serial Interface Kit-K2 / Copy Control Interface Kit-A1 > Installation Procedure > After Installation
1x
1x
2x
9-14
5x
F-9-34
9-14