Canon imageRUNNER ADVANCE C350 series Service Manual page 934

COPIER> OPTION> USER
DATE-DSP Setting of date/time display format
Lv.2 Details To set date/time display format according to the country or region.
After the display format is set with this mode, the order of date is
reflected to the followings: Preferences> Timer/Energy Settings>
Date/Time Settings, and report output.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: YYMM/DD, 1: DD/MMYY, 2: MM/DD/YY
Default value According to the setting at shipment
Related UI menu Preferences> Timer/Energy Settings> Date/Time Settings
CONTROL Charge setting of PDL job
Lv.1 Details To set charge count transmission of PDL job to the connecting
charging management device (coin manager or non-Canon-made
control card).
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: No charge, 1: Charge
Default value 0
Related service mode COPIER > OPTION > ACC > COIN
CNT-DISP Display/hide of serial number
Lv.2 Details To set whether to display or hide the serial No. on the Counter Check
screen.
Use case When setting to display/hide serial No. on the Counter Check screen
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Display, 1: Hide
Default value 0
COPY-JOB Setting of copy job reservation
Lv.1 Details To set to enable/disable copy job reservation when the Card Reader/
Coin Manager is used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER> OPTION> USER
P-CRG-LF ON/OFF of Drum Unit life warning display
Lv.1 Details To set whether to display a warning message when the Drum Unit
reaches its life.
By selecting 1, a warning message is displayed on the status line of
LUI when the COPIER> COUNTER> LF> Y/M/C/K-DRM-LF value
reaches 95.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> COUNTER> LF> Y/M/C/K-DRM-LF
COPIER> OPTION> FNC-SW> D-DLV-BK/CL
Supplement/memo Display timing can be adjusted by COPIER> OPTION> FNC-SW>
D-DLV-BK/CL.
CPRT-DSP ON/OFF of [Print Charge Log] button
Lv.1 Details To set whether to display the [Print Charge Log] button to print the
charge logs on the charge log screen in Settings/Registration.
When "1: ON" is set, the button is displayed in Management
Settings> Charge Management> Charge Log Screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related UI menu Management Settings> Charge Management> Charge Log
PCL-COPY Set of PCL COPIES command control method
Lv.2 Details To set the binder control method of COPIES command with PCL.
Select whether to use the control method of Canon-made PCL or
use the same control method of non-Canon-made PCL.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
0: Control method of Canon-made PCL (following the value of
COPIES command that is specified for each page to control on a
page basis)
1: Control method of non-Canon-made PCL (handling the value
of COPIES command, which is specified for page 1 at the time of
Collate mode, as bind figure while the value of COPIES command
for the next page or later is invalid. Same control applies as Canon-
made PCL at the time of Non Sorted mode)
2 to 65535: For future use
Default value 0
8-164
8-164