Canon imageRUNNER ADVANCE C350 series Service Manual page 350

4
Disassembly/Assembly > External Cover/Interior System > Removing the Right Cover Unit > Procedure
1) Disconnect the Connector [1].
CAUTION:
Be sure to disassemble/assemble by holding the Right Cover Unit [1] after step 2.
4 Disassembly/Assembly > External Cover/Interior System > Removing the Right Cover Unit > Procedure
1x
[1]
F-4-75
[1]
F-4-76
2) Remove the Right Cover Stopper Rear Holder [1].
• 1 Screw [2]
NOTE: How to assemble the Right Cover Stopper Rear Holder
When assembling, be sure to align the hook [1] and the boss [2], and align the shaft
[3] of the Right Cover Stopper Rear with the groove [A] of the Right Cover Unit and the
groove [B] of the Right Cover Stopper Rear Holder to install the holder.
[A]
[1]
1x
[1] [2]
F-4-77
[3]
[2]
[B]
F-4-78
4-43
4-43