Canon imageRUNNER ADVANCE C350 series Service Manual page 898

COPIER> OPTION> FNC-SW
T-DLV-BK Set Bk pre-toner low alarm notice timing
Lv.1 Details To set the timing to notify the pre-toner low alarm for Bk-color (toner
level).
Use case When changing the timing to notify the end of life according to the
usage status
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Since toner level is calculated based on the developing supply count,
some errors may occur.
Display/adj/set range 0 to 40
Unit 1 %
Default value It differs according to the location.
Related service mode COPIER> OPTION> FNC-SW> T-DLV-CL
T-DLV-CL Set YMC pre-toner low alarm notice tmg
Lv.1 Details To set the timing to notify the pre-toner low alarm for Y/M/C-color
(toner level).
Use case When changing the timing to notify the end of life according to the
usage status
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Since toner level is calculated based on the developing supply count,
some errors may occur.
Display/adj/set range 0 to 40
Unit 1 %
Default value It differs according to the location.
Related service mode COPIER> OPTION> FNC-SW> T-DLV-BK
D-DLV-BK Set Bk Drum auto delvry alarm notice tmg
Lv.1 Details To set the timing to notify the auto delivery alarm for the Drum Unit
(Bk).
Use case When changing the timing to notify the end of life according to the
usage status
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Since the drum is integrated with the Developing Assembly, some
errors may occur depending on the usage conditions.
Display/adj/set range 50 to 200
Unit 1 %
Default value 100
Related service mode COPIER> COUNTER> LF> K-DRM-LF
8
Service Mode > COPIER > OPTION > FNC-SW
8 Service Mode > COPIER > OPTION > FNC-SW
COPIER> OPTION> FNC-SW
D-DLV-CL Set YMC Drum auto dvry alarm notice tmg
Lv.1 Details To set the timing to notify the auto delivery alarm for the Drum Unit (Y/
M/C).
Use case When changing the timing to notify the end of life according to the
usage status
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Since the drum is integrated with the Developing Assembly, some
errors may occur depending on the usage conditions.
Display/adj/set range 50 to 200
Unit 1 %
Default value 100
Related service mode COPIER> COUNTER> LF> Y/M/C-DRM-LF
JM-ERR-D Set of error display of 0CAx jam (DCON)
Lv.2 Details To set whether to display "0CAF" jam as the error "E996-0CAF".
In the case of a jam, log cannot be obtained depending on the timing.
By selecting 1 when the jam "0CAF" occurs, it is displayed as the
error "E996-0CAF" so that the log can be obtained.
Use case When obtaining a log at the occurrence of 0CAF jam
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Display as a jam, 1: Display as an error
Default value 0
JM-ERR-R Set of error display of 0071 jam (RCON)
Lv.2 Details To set whether to display "0071" jam as the error "E996-0071".
In the case of a jam, the target log will be lost, so that it may not be
able to be checked.
When 1 is set, it is handled as an error so that the log which has
been backed up can be obtained.
Use case When checking the occurrence of 0071 jam
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Display as a jam, 1: Display as an error
Default value 0
Related service mode COPIER> OPTION> FNC-SW> JM-ERR-D
DFTSCNSZ Setting of default scan size
Lv.1 Details To set the default scan size when scan size is not specified.
Use case Upon user's request
Display/adj/set range 0 to 1
0: LTR, 1: LGL
Default value 0
8-128
8-128