Canon imageRUNNER ADVANCE C350 series Service Manual page 835

COPIER> ADJUST> CCD
GAIN-CL0 Adj CIS gain level: color mode, 300 dpi
Lv.1 Details To adjust the gain (amplification of detection level) of the Scanner
Unit in color mode with 300 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 255
Default value 0
Related service mode COPIER> FUNCTION> CCD> CL-AGC
GAIN2CL0 Adj CIS gain level: color mode, 600 dpi
Lv.1 Details To adjust the gain (amplification of detection level) of the Scanner
Unit in color mode with 600 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 255
Default value 0
Related service mode COPIER> FUNCTION> CCD> CL-AGC
LED-CL-R Adj LEDSTOP VL (R): color mode, 300 dpi
Lv.1 Details To adjust the lighting time of the red color LED which is a primary
light source of the Scanner Unit in color mode with 300 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2048
Default value 544 (iR-ADV C250)/408 (iR-ADV C350)
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
LED-CL-G Adj LEDSTOP VL (G): color mode, 300 dpi
Lv.1 Details To adjust the lighting time of the green color LED which is a primary
light source of the Scanner Unit in color mode with 300 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2048
Default value 720 (iR-ADV C250)/650 (iR-ADV C350)
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
8
Service Mode > COPIER > ADJUST > CCD
8 Service Mode > COPIER > ADJUST > CCD
COPIER> ADJUST> CCD
LED-CL-B Adj LEDSTOP VL (B): color mode, 300 dpi
Lv.1 Details To adjust the lighting time of the blue color LED which is a primary
light source of the Scanner Unit in color mode with 300 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2048
Default value 496 (iR-ADV C250)/454 (iR-ADV C350)
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
LED2CL-R Adj LEDSTOP VL (R): color mode, 600 dpi
Lv.1 Details To adjust the lighting time of the red color LED which is a primary
light source of the Scanner Unit in color mode with 600 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2048
Default value 1192 (iR-ADV C250)/678 (iR-ADV C350)
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
LED2CL-G Adj LEDSTOP VL (G): color mode, 600 dpi
Lv.1 Details To adjust the lighting time of the green color LED which is a primary
light source of the Scanner Unit in color mode with 600 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2048
Default value 1469 (iR-ADV C250)/1020 (iR-ADV C350)
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
LED2CL-B Adj LEDSTOP VL (B): color mode, 600 dpi
Lv.1 Details To adjust the lighting time of the blue color LED which is a primary
light source of the Scanner Unit in color mode with 600 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2048
Default value 1016 (iR-ADV C250)/714 (iR-ADV C350)
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
8-65
8-65